Tech guide

Flap Discs Explained: Grits, Type 27 vs. Type 29, XL, Hubbed & Surface Conditioning

3 min read

Flap discs are one of the most-used products in fabrication, but there are dozens of styles. Brian from Frontier walks through our best sellers so you can get the right disc the first time.

40 grit: our #1 seller (0:44)

A 4½" × 7/8" Type 27 zirconia disc that takes down a weld, blends it, and leaves a finish ready for paint or powder coat, all with one disc. It's nearly as aggressive as a 36 grit, and as it wears it works like a finer disc. Brian calls it "probably the most versatile disc that you'll get."

60 grit: for a finer finish (2:03)

The same disc in a finer grit, and our #2 seller. Use it when you want the work "really finished out."

Zirconia vs. aluminum oxide

All of our flap discs use blue zirconia on a cloth backing. It lasts much longer than the cheaper red or maroon aluminum oxide.

Why we don't recommend 80 and 120 grit (2:52)

Finer grits tend to glaze: the disc loads up, a shiny black ring forms, and it stops cutting. You can sometimes break the glaze loose by running the disc against a sharp edge, but 40 and 60 grit avoid the problem.

XL flap discs: thicker and longer lasting (3:43)

XL discs have a thicker flap pack with more give. They're great for feathering a corner or rounding over an edge, and they last longer when you use them all the way down. Available in 36, 40, 60, 80 and 120 grit.

Type 27 vs. Type 29 (4:48)

Type 27 is flat. Type 29 is angled, which matches the way you naturally tilt a grinder, so more of the disc stays on the work. Both come in every grit, in standard or XL.

Hubbed flap discs (5:40)

A 5/8"-11 nut is pressed into the center, so the disc threads straight onto your grinder with no flange nut needed. It's the same disc, just faster to change, and usually about $1 more per disc.

Surface conditioning (Scotch-Brite style) discs (6:29)

Use these for blending welds and fabrication marks into one uniform finish. They're a favorite of our customers who build custom bumpers and multi-piece weldments. In Brian's words: "when you do need it you're going to be darn glad you have that thing sitting on your shelf."

Frequently asked questions

What grit flap disc is best for grinding welds?
40 grit. It removes weld material quickly and still leaves a paintable finish.

What's the difference between Type 27 and Type 29 flap discs?
Type 27 is flat, for flat surfaces and finishing. Type 29 is angled, for heavier removal at your natural grinding angle.

Why did my flap disc stop cutting?
It has probably glazed. Look for a shiny black ring on the disc. This happens most with 80 and 120 grit.

Is zirconia better than aluminum oxide?
For steel fabrication, yes. Zirconia cuts longer and wears more slowly than aluminum oxide.

Shop flap discs →

All Tech Guides

Need a business account or volume pricing?

Set up company ordering for your crew, get quotes on bulk orders, or ask us to source something you don't see online.

Visit

4551 E Ivy St, #101
Mesa, AZ 85205

Hours

Mon–Thu 7:00 am – 4:00 pm
Fri 8:00 am – 12:00 pm
Sat–Sun Closed